TREN
🧪 ESANS.COM.TR ACADEMY — Technical Formulation Portal
🧪
Esans.com.tr Academy
Technical Formulation Portal
← All Articles
IFRA & Limits ↗

What Documents Should You Request from Your Supplier? (IFRA, SDS, Allergen, COA, TDS)

Every fragrance oil you use in a finished product must be backed by a paper trail. Learn which five documents to request from your supplier — and why each one is non-negotiable.

Esans.com.tr Academy ·✍️ Esans Academy Technical Team ·~13 min read·Updated: 21.10.2026
01

Requesting Documents Is Not a Luxury — It's Your Shield

When you add a fragrance oil to your basket, you are also purchasing a promise: "This blend, used at the correct level, is safe." But a promise cannot float in the air; it must be committed to paper. If you fail to request the right documentation from your supplier, the moment you place your product on the market, all liability lands squarely on your shoulders. The rest is your signature.

In Turkey, for cosmetic/perfume sales, the responsible person (manufacturer/importer) is legally liable for the safety of the product. Your supplier provides the raw material; but you are the one who builds the technical dossier proving that raw material has been incorporated into the finished product at the correct level. That dossier rests on five foundational documents: the IFRA Certificate of Conformity, the SDS (Safety Data Sheet), the Allergen Declaration, the COA (Certificate of Analysis), and the TDS (Technical Data Sheet).

Let's clarify one point from the outset: IFRA is not a government body. IFRA Standards underpin the safe and responsible use of fragrance in consumer products; they are mandatory for IFRA members and are the product of peer-reviewed research and safety analysis. In other words, IFRA is an industry self-regulatory framework — but because EU and many national regulations are built upon these standards, they represent a line you must, in practice, comply with.

Key distinction: Your supplier provides documentation for the raw material. You build the technical dossier and safety assessment for the finished product. To keep the document chain intact, request the same paperwork with every batch.
🧮 Interactive Tool
IFRA Limit Calculator

Enter the category limit from your fragrance oil's IFRA certificate to see the maximum oil for your batch.

⚠️ Always take the limit from the fragrance oil's own IFRA certificate — every oil differs by category. This tool is a convenience, not a substitute for the certificate. · esans.com.tr Akademi

02

The Five Documents You Must Request — and What Each One Does

Each document answers a different question. You cannot substitute one for another: the SDS covers safety, the COA covers quality, the IFRA certificate covers compliance, the TDS covers usage, and the allergen declaration feeds your label. The table below draws a clear line between what each document proves.

DocumentWhich Question Does It Answer?What Does It Contain?Why Is It Critical?
IFRA Certificate of Conformity"In which product category can I use this fragrance oil, and at what maximum percentage?"Maximum application concentrations (MAC) by category, amendment version appliedSets the maximum usage level; exceeding it renders the product unsafe
SDS / Safety Data Sheet"How do I transport and store this material, and what do I do if it spills?"Flash point, hazard classification (CLP), first aid, storage, transport (ADR)Legally mandatory; the basis for laboratory safety and transport
Allergen Declaration"Which allergens must I declare on the label?"Percentages of allergens listed under EU cosmetics legislation present in the fragrance oilMandatory for label (INCI) compliance and consumer safety
COA (Certificate of Analysis)"Does the batch I received meet the specification?"Batch number, density, refractive index, colour, odour approval, analysis dateProves batch consistency and quality
TDS (Technical Data Sheet)"How and where do I use this fragrance oil?"Density, solubility, recommended applications, solvent compatibility, shelf lifeGuides formulation and bottling decisions

Pay close attention to who issues the IFRA certificate. An IFRA Certificate of Conformity is a document prepared solely by companies that formulate fragrance blends; it is issued within the framework of the trust relationship between a supplier and their customer, applies only to fragrance blends designed to be incorporated into finished consumer products, and with it the supplier confirms that the product complies with IFRA Standards for the stated use. In other words, the document is issued to you by the party that manufactures or formulates the fragrance oil.

An important caveat: IFRA itself does not issue certificates and does not authorise any third-party organisation to issue certificates on its behalf. If you see a statement such as "certified by IFRA", treat it with scepticism — the document is a supplier declaration.

Tip: Look for the amendment version in the top corner of the IFRA certificate. Certificates state that the product complies with IFRA Standards up to and including Amendment 51 and is valid when used at the maximum concentration level in the specified categories. A certificate issued under an older amendment may no longer be current.
03

Current IFRA Amendment Version and Certificate Validity

If a certificate has been drawn up under an outdated amendment, the paper is still in your hand but its protection is weakened. You therefore need to know which amendment the IFRA certificate from your supplier is based on, and what its validity dates are.

The currently applicable version is Amendment 51. Amendment 51 to IFRA Standards was published on 3 July 2023 and communicated by a letter dated 30 June. This update was not a minor touch-up: Amendment 51 introduced 59 new rules to IFRA Standards, bringing the total to 263.

The transition timeline is divided into two categories. An IFRA Certificate of Conformity compliant with Amendment 51 was required for NEW products by 30 March 2024, and for EXISTING products by 30 October 2025; this applies only to new Restriction and Restriction Specification Standards. The timeline for prohibitions is different: Amendment 51 contains 1 new Prohibition Standard with separate compliance dates — 30 August 2023 for new products and 30 July 2024 for existing products.

One further nuance: these dates apply only to the supply of fragrance blends (formulae), not to finished consumer products already on the market. In other words, the document chain binds your supplier first, and then you.

Standard TypeNew ProductsExisting Products
Prohibition30 August 202330 July 2024
Restriction / Specification30 March 202430 October 2025

Note: The IFRA cycle is updated at approximately three-year intervals. When requesting a certificate, explicitly ask for one "based on the most current amendment"; once the next version is announced, new transition dates come into force. The Standards notification cycle is normally every three years, unless there is a significant change such as Amendment 50.

Caution — natural does not mean safe: A significant proportion of the allergens subject to the strictest IFRA restrictions are found at high levels in natural essential oils. Components such as eugenol, geraniol, methyl eugenol, hydroxycitronellal, and estragole occur naturally in natural essential oils — which means even entirely natural blends must be scrutinised for compliance. Safety depends on the molecule and the usage level, not the source.
04

How to Request Documents — Step by Step

Requesting documents is not merely a matter of sending an email; it is a discipline. If you ask in the right order with the right information, your supplier will send the right document. Here is the workflow that works in practice:

  1. State your intended use clearly

    Tell the supplier which product the fragrance oil will go into: a perfume, a cream, a room fragrance? IFRA limits vary by product category. Without knowing which category you are working in, you cannot obtain the correct MAC level. (Related topic: IFRA Category Selection: Which Is Right for Your Product — 4A, 5A, or 5B?)

  2. Request all five documents together

    The IFRA Certificate of Conformity, SDS, allergen declaration, COA, and TDS — request all of them in a single communication. If you ask piecemeal, tracking consistency across batches becomes far more difficult.

  3. Verify the amendment version

    In the IFRA certificate you receive, look for the reference to "Amendment 51" (or the current version). If it is an older version, request an updated certificate.

  4. Match the COA to the batch number

    The batch number on the consignment you receive must match the batch number on the COA exactly. If they differ, that COA does not represent that batch.

  5. Transfer allergen percentages to the label

    Multiply the percentages in the allergen declaration by the proportion of the fragrance oil in the finished product; any allergen that exceeds the threshold must appear on the label (INCI). This calculation is directly linked to the maximum usage level calculation. (Related topic: How to Calculate the Maximum Usage Level)

  6. Archive documents in the technical dossier

    Store each batch's paperwork with its date and batch number. In the event of an inspection, you must be able to answer instantly which document corresponds to which batch.

FIGURE 01Process Strip — Step by Step
🔹1. State yourintended use…🔹2. Request allfive documents…🔹3. Verify theamendment version…🔹4. Match the COAto the batch…🔹5. Transferallergen…🔹6. Archivedocuments in the…

Don't fall into the density trap. The TDS will always include the specific gravity (density), and it is critical for bottling. Fragrance oil densities vary enormously: citrus-dominant blends can sit around ~0.84 g/ml, while heavy resinous or synthetic-heavy blends can exceed 1.10 g/ml. If you convert a formula measured in grams to volume (ml) without accounting for density, you will end up with either overflow or underfill. For example, 10 g of a citrus fragrance oil occupies approximately 11.9 ml (10 ÷ 0.84), whereas 10 g of a heavy musk base may occupy only ~9 ml. Always establish your conversions using the relationship mass = volume × density.

Laboratory safety — do not skip this: High-proof ethanol and room fragrance solvents (DPM, MMB, Dowanol, etc.) are low flash-point, highly flammable materials. Read the flash point in the SDS; avoid static electricity, ensure good ventilation, and wear gloves and eye protection. The SDS is not just a piece of paper — it is the operating manual for laboratory safety.
Tip — longevity ≠ concentration: Do not assume that increasing the fragrance oil concentration will improve longevity. Longevity and projection (sillage) depend primarily on the volatility of the raw materials. A citrus-dominant 25% extrait may fade quickly, while an amber, oud, or musk-dominant 10% product may linger for hours. Concentration alone does not determine performance; the structure of the formula and the balance of volatility do.
05

Documents Sorted — What's Next for Legal Sales?

You have obtained the five documents from your supplier and assembled your technical dossier. There is now one more step before you can legally sell and invoice your product in Turkey: the ÜTS notification. Once the top notes have flown, this layer takes the stage.

To sell a cosmetic/perfume product legally on Trendyol, Hepsiburada, or your own website, the product must be notified to the TITCK Product Tracking System (ÜTS). The documents required to initiate the process are:

  • Trademark registration certificate OR application — Turkish Patent and Trademark Office. Important: a trademark application is sufficient for ÜTS; you do not need to wait for registration to be completed. It may be in the name of an individual or a company.
  • Barcode from GS1 Turkey — GS1 Turkey. GS1 Turkey is the official body that assigns globally unique barcode (GTIN) numbers to products. Every product must have a GS1 barcode (GTIN) to be notified in ÜTS — this is mandatory, because ÜTS identifies and tracks the product by this barcode number. GS1 membership is an annual subscription renewed each year; the membership assigns a number range to your business, and you generate a separate barcode from that range for each different scent or variant. In other words, if you plan to sell 10 different perfumes, you define 10 separate GTINs and notify each one individually in ÜTS. The barcode may be registered in the name of an individual or a company.
  • An appointed responsible manager (mesul müdür) — who conducts the process using a digital signature (e-imza).

The notification is submitted via the ÜTS application portal.

Distinguish between the process and the responsibility. The process comprises the notification steps above: obtaining a trademark and barcode, registering your business, and notifying your products. Responsibility is a separate matter: the responsible manager and the responsible person (manufacturer/importer) are legally liable for the safety of the product and for the completeness of the technical dossier (IFRA, SDS, TDS, allergen, COA). Having completed the notification does not exempt you from carrying out the safety assessment.

Approximate 2026 official fees (payable to the relevant bodies; separate from consultancy/responsible manager fees):

ItemApproximate 2026 AmountFrequency
ÜTS company registration application~9,117 TLOne-off
GS1 barcode membership~2,344 TL + VATAnnual renewal
Product notification fee~322 TLPer scent/barcode
Trademark registrationPer Turkish Patent tariffOne-off
Digital signature (e-imza)~3,999 TL3-year term

The total start-up cost for 2026 is approximately 65,000–70,000 TL, and all procedures can be completed in roughly one week. These figures are based on the 2026 tariff and change every year; verify the current amounts with the relevant official source before proceeding.

Continue

🛒 Related Product
All Products
Browse products →
🧪 Related Tool
Laboratory & Search
Open calculator →

esans.com.tr

Explore →