TREN
🧪 ESANS.COM.TR ACADEMY — Technical Formulation Portal
🧪
Esans.com.tr Academy
Technical Formulation Portal
← All Articles
Production ↗

Attar & Oil-Based Perfume Production: Choosing IPM, Jojoba or Fractionated Coconut as Your Carrier

A practical guide to oil-based and attar perfume making — comparing IPM, jojoba and fractionated coconut oil as carriers, with dosage tables, production steps and safety notes.

Esans.com.tr Academy ·✍️ Esans Academy Technical Team ·~9 min read·Updated: 21.10.2026
01

The Attar Tradition and the Logic of Alcohol-Free Fragrance

Once alcohol evaporates, the oil is left alone on stage holding the scent. The attar tradition is built entirely on this principle: a concentrated fragrance oil dissolved in a carrier oil releases slowly onto the skin. Everything else is determined by the character of the carrier.

In the classical sense, attar was produced by collecting steam-distilled aromatics into sandalwood oil. Today, most aspiring formulators create an oil-based fragrance by diluting a ready-made fragrance oil in a non-food cosmetic carrier. That is the bridge between the two worlds.

The appeal of an alcohol-free formula is clear: there is no sharp initial alcohol blast, the fragrance opens more warmly on skin, and it stays close to the body (a skin scent). The trade-off is that sillage (scent trail) is generally more restrained — the oil holds the molecules but releases fewer of them into the air.

In an oil-based fragrance, the perception of longevity is high because the molecules stay on the skin; however, diffusion into the air (projection) is lower than in an alcohol-based fragrance. Do not confuse the two.

One caveat from the outset: none of the cosmetic/fragrance oils or carrier oils discussed here are food products. Even where the term "food grade" appears, these products are not intended to be eaten or drunk; they are formulated exclusively for application to the skin.

02

Carrier Oil Selection: Three Candidates Head to Head

When the top notes have evaporated, the carrier takes over the stage. The wrong oil can distort the scent or turn it rancid within months. The right oil remains invisible.

Make your choice based on three criteria: shelf life / oxidative stability, skin feel and scent neutrality. The three most commonly used candidates are:

CarrierStructureShelf lifeSkin feelScent neutrality
IPM (isopropyl myristate)Synthetic esterVery long; does not oxidiseLight, dry, spreads quicklyAlmost completely neutral
JojobaLiquid wax ester (botanical)Very long (wax structure; does not go rancid)Velvety, silky, medium absorptionVery faint seed note
Fractionated coconut oil (FCO)Medium-chain triglycerideLong; stays clear; does not solidifyLight, gliding, absorbs quicklyClose to neutral; very faintly sweet

IPM is also an emollient / carrier solvent belonging to the family of ingredients that moderate alcohol's volatility. It is sometimes referred to as a "fixative", but that is incorrect — true fixatives are macrocyclic musks, heavy balsams and resins, and glucose ethers such as Glucam P-20. IPM does not increase molecular weight; it simply provides mild diffusion and a dry touch.

Jojoba is technically not an oil but a liquid wax, which is why — unlike other botanical oils — it resists rancidity. It is the classic base for intense, oud/amber-focused Gulf-style attars. In warm weather it can feel "oily" on skin.

Fractionated coconut oil (FCO) is stripped of its long-chain fractions, so it stays clear and odourless and does not solidify in cold conditions — making it practical for roll-on applications.

Tip: For a clear, fresh, citrus-forward composition choose IPM or FCO. For a dense, oriental, oud-amber structure, jojoba's velvet "anchors" the scent beautifully.
03

Roll-On Dosage and Production Steps

In an oil-based product, the ratio alone does not determine performance; the real determining factor is the volatility of the raw materials. Even so, a starting framework is necessary.

The ranges below are starting points — always test them in your own formula. A citrus-heavy fragrance oil can fade quickly even at 20%, while an amber/musk-dominant composition may last for hours at 12%.

ProfileFragrance oil (by weight)CarrierNote
Everyday / light roll-on10–15%FCO or IPMFresh, close to skin
Intense attar style18–25%JojobaOriental, long-lasting
Hybrid (feel + diffusion)15–20%Jojoba 70% + IPM 30%Balanced touch

Grams or millilitres? Build your formula by weight (grams); account for density when filling by volume. Citrus fragrance oils run around 0.84 g/ml, while heavy synthetics/resins can exceed 1.10 g/ml. If you simply pour "10 g" into a 10 ml roll-on based on weight alone, you will end up with overflow or underfill. Convert using volume × density = mass.

  1. Weighing

    Weigh the carrier and fragrance oil separately on a precision balance, in grams. Run a small trial batch (5–10 g) before scaling up.

  2. Mixing

    Add the fragrance oil to the carrier gradually and homogenise at low speed. For small batches, a magnetic stirrer delivers far more consistent homogeneity than hand-shaking; see our homogenisation guides for details.

  3. Resting (maceration)

    Chemical maturation in an oil-based product is more limited than in an alcohol-based one, but allow 3–7 days at room temperature (~15–20 °C) in the dark for the fragrance oil and carrier to fully integrate. Do not refrigerate — cold slows the process.

  4. Clarity check

    If you notice cloudiness or sediment, the fragrance oil and carrier are not fully compatible. Reduce the fragrance load or switch the carrier.

  5. Bottling

    Fit the roll-on balls to clean, dry bottles and fill, accounting for volumetric overflow by calculating with density.

FIGURE 01Process Strip — Step by Step
🔹1. Weighing Weighthe carrier and…🔹2. Mixing Add thefragrance oil to…🔹3. Resting🔹4. Clarity checkIf you notice…🔹5. Bottling Fitthe roll-on balls…
In an oil-based product, "cloudiness" is not moisture-related as it might be in an alcohol-based one; it typically comes from an insoluble fragrance component or a carrier that solidifies in the cold. FCO does not solidify; jojoba does not solidify — if a problem arises, question the fragrance load first.
04

Common Mistakes, Safety and Compliance

Being oil-based does not mean "anything goes". Every formula that contacts skin demands the same safety discipline.

Do not assume natural = safe. The strictest IFRA restrictions most often fall on allergens found in natural essential oils: Citral, Eugenol, oakmoss… Natural bergamot is phototoxic and can cause pigmentation on sun-exposed skin. By contrast, certain pure synthetics such as Ambroxan and Iso E Super are considered nearly neutral from an allergy standpoint. Safety depends on the molecule and the usage level, not the source.

Do not reduce IFRA to a simple percentage rule. There is no blanket rule such as "25% is fine because it's oil-based." Limits are determined by the individual substances within the fragrance oil and by the product category (leave-on). Always read the IFRA compliance statement for the fragrance oil you are using and adjust your usage level to the leave-on limit.

Rancidity risk. Standard botanical oils (grapeseed, sunflower, etc.) can turn rancid within months, ruining the scent. This is why jojoba, IPM and FCO are preferred — all three are oxidatively stable.

Laboratory safety. Even if you are not using alcohol in the oil-based production itself, you may keep high-proof ethanol or solvents on hand for cleaning and dilution. These are highly flammable (low flash point); adequate ventilation, avoidance of static electricity and personal protective equipment (gloves, eye protection) are essential. Refer to our laboratory setup guide for equipment planning.

If you are invoking aromatherapy associations, choose your words carefully: stay within the language of relaxation/traditional use; do not make health claims such as "cures" or "treats". This is not medical advice.

Product notification. If you intend to place a cosmetic product on the market in Turkey, keep two aspects separate: the process (company registration and product notification steps via the ÜTS system) and liability (responsible person/manufacturer obligations and safety assessment). ÜTS company registration and product notification are subject to official fees; "notification is free" is not accurate. Always refer to the TİTCK source for current procedures, fees and obligations.

05

Gulf Market Expectations and Frequently Asked Questions

The most mature market for oil-based fragrance is the Gulf. There, a product is assessed first on its texture and purity, before its scent.

Gulf consumers expect high concentration, oud-amber-musk-focused depth and intimate, skin-hugging longevity. A jojoba base is the closest feel to those expectations. Clarity, freedom from sediment and consistent texture in the bottle make a significant difference — which is why establishing reliable heated or unheated homogenisation techniques for batch-to-batch consistency is important.

In resinous, heavy compositions, mild heat aids solubility; but if you need to preserve volatile top notes, keep the heat limited. Our heated homogenisation guide details exactly how far heat can be your friend.

When building an accord, simply diluting a ready-made fragrance oil in a carrier is not the only path. You can combine several raw materials by weight to create your own signature. The rest is yours.

Is an oil-based fragrance more long-lasting than an alcohol-based one?
The perception of longevity on skin is generally greater because the molecules are held by the oil on the skin. However, diffusion into the air (sillage/projection) is lower than in an alcohol-based fragrance. Moreover, longevity ultimately depends on the volatility of the raw materials; a citrus oil fragrance can fade quickly too. The ratio alone does not determine performance.
Should I choose jojoba, IPM or fractionated coconut oil?
If you are aiming for a dense, oriental, long-lasting attar, jojoba's velvety base is ideal. For a fresh, dry, fast-diffusing feel, IPM is the better choice. For a clear, odourless, non-solidifying practical roll-on, fractionated coconut oil (FCO) stands out. Most formulators blend jojoba + IPM to strike a balance.
Should I calculate my formula in grams or millilitres?
Always weigh your formula in grams; when filling by volume, account for density. Fragrance oil densities vary widely (citrus ~0.84 g/ml; heavy synthetics/resins above 1.10 g/ml). Convert using the relationship volume × density = mass; otherwise you will experience overflow or underfill in your roll-on bottles.

Continue

🛒 Related Product
Hammaddeler
Browse products →
🧪 Related Tool
Laboratory & Search
Open calculator →

esans.com.tr

Explore →